Standard Models
Dreadnought Classic
Orchestra Model
Orchestra Model / Venitian Cutaway
General Specs; Dreadnought
Total Length 40 1/8”
Body Width 16 5/16”
Body Length 19 7/8”
Body Depth 4 5/8”
Scale Length 25.4
14 Frets to Dovetail Body Joint
Frets; Nickel Steel .084 width x .039 crown
General Specs; Orchestra Model
Total Length 39 ½”
Body Width 15 1/8”
Body Length 19 5/8”
Body Depth 4 ¼”
Scale Length 25.4
14 Frets to Dovetail Body Joint
Frets; Nickel Steel .084 width x .039 crown
Wood Species; Body and Sides
Mahogany
Sapele
Zebra
Black Limba (Korina)
Hormigo (Granadillo)
Bolivian Rosewood (Pau Ferro)
Alternate species available upon request and availability.
Wood Species; Soundboard
Sitka Spruce
Adironack Red Spruce (upcharge applies)
Wood Species; Neck
Neck Blank:
Mahogany
Sapele
Maple
Fretboard:
Indian Rosewood
Padauk
Bubinga
Gabon Ebony (upcharge applies)
Embellishments:
Rosette
Solid hardwood inlay, (Walnut, African Blackwood, Cocobolo)
With 1 inside and 1 outside border BWB/WBW inlays.
With 2 outside perimeter BWB/WBW inlays.
Finish
Nitrocellulose Lacquer, High Gloss Standard
Solid Colors available
Filled and non-filled grain texture available
Sunburst, 2 tone and 3 tone (upcharge applies)
Hardware
Tuners: Gotoh
Frets: Nickel Steel
Strap Buttons: 1 Nickel Steel on tail (unless specified otherwise)
Bridge saddle and nut: Graphtech Tusq
Electronics: Fishman (electronic models only)
Solid hardwood inlay,
100 Series
200 Series
300 Series
100 Series
Headstock Perimeter; veneer cap, front only .060
Fretboard Edge Binding; N/A
Body Binding Front and Back; solid color or BWB/WBW .250 x .060
Purfling; N/A
Side Markers PVC/ABS 1/16” @ 3, 5, 7, 9, 12, 15
Position Markers; pearl 13/64” @ 3, 5, 7, 9, 12, 15
Tail End Graft; N/A
Pickguard; Black
200 Series
Headstock Perimeter; front only B or W .250 x .060
Fretboard Edge Binding; B or W .250 x .
Body Binding Front and Back; solid color or BWB/WBW .250 x .060
Purfling; BWB/WBW .060 x .060 soundboard and back
Side Markers PVC/ABS 1/16” @ 3, 5, 7, 9, 12, 15
Position Markers; Pearl 13/64” @ 3, 5, 7, 9, 12, 15
Tail End Graft; wedge with .060 BWB/WBW
Backstrip optional, Cocobolo w/maple border
Pickguard; Black
300 Series
Headstock Perimeter; veneer cap, front only .060
Fretboard Edge Binding; B or W .250 x .
Body Binding Front and Back; hardwood inlay .250 x .060
Purfling; BWB/WBW .060 x .060 soundboard,back/sides
Side Markers PVC/ABS 1/16” @ 3, 5, 7, 9, 12, 15
Position Markers; Pearl 13/64” @ 3, 5, 7, 9, 12, 15
Tail End Graft; ½” x body depth incl. ,edge mitered to purfling
Backstrip optional, Cocobolo w/maple border
Pickguard; Black